Technology Collaboration Programme by IEA logo

IEA Greenhouse Gas R&D Programme

Technical Session 3

Time Session Paper
     
13.50  3A CO2 Enthalpy and Heat Capacity Measurements in Aqueous Piperzine Blends with Different Alkanolamines:
Abdurahim Abdulkadir, Masdar

14.10  3A

A Thermally Stable Piperzine Blend for CO2 Capture
Yang Du, The University of Texas at Austin

14.30  3A

Kinteic Effects of Adding Aqueous 2-(Ethylamino) Ethenol Across Different Aqeuous Tertiary Amines Using Stopped-Flow Technique:
Mohammad Abu Zahra, Masdar

14.50 3A

Kinetics of Carbonic Anhydrase in Promoted Chemical Solvents for Carbon Dioxide Absorption:
Arne Gladis, Technical University of Denmark

15.10 3A

The Effect of the Physical Liquid-Side Mass Transfer Coefficient on Absorber Perfornmance with Aqueous Piperzine:
Darshan Sachde, The University of Texas at Austin

   

 

     Dynamic Modelling
13.50 3B

Controllability Analysis of a Post-Combustion CO2 Capture Plant Integrated with a Coal and a Natural Gas Fired Power Plant:
Evgenia Mechleri, Imperial College London

14.10  3B A Pilot-Scale Study of Dynamic Operating Scenarios for Flexible Post-Combustion CO2 Capture:
Paul Tait, The University of Edinburgh

14.30 3B

Controllability and Flexibility Analysis of a CO2 Capture Plant using MEA and Piperzine Promoted K2CO3:
Jozsef Gaspar, Technical University of Denmark

14.50 3B Dymanic Modelling of a Supercritical Coal-Fired Power Plant Integrated with Post-Combustion CO2 Capture:
Stefanía Ósk Garðarsdóttir, Chalmers University of Technology

15.10 3B

Modelling of MEA-BAsed CO2 Capture Process with Uncertainty Quantification and Validation with Steady-State and Dynamic:
Debangsu Bhattacharyya, West Virginia University

     
     
13.50 3C

Rate-Based Modelling and Simulation of CO2 Absorption and Desorption using Piperazine Promoted Potassium Carbonate:
Philip Loldrup Fosbøl, Technical University of Denmark

14.10 3C

Study of Heat Duty of Catalyst-Aided Amine-Based CO2 Capture Process
Wayuta Srisang, University of Regina

14.30 3C

Advanced Solid Sorbent-Based CO2 Capture Process:
Benjamin Decardi-Nelson, University of Regina

 14.50  3C Advanced Solid Sorbent-Based CO2 Capture Process:
Markus Lesseman, RTI International

 15.10  3C

Sensitivity Analysis of Post-Combustion CO2 Capture at Pilot Scale Level:
Usman Ali, University of Sheffield