Technology Collaboration Programme by IEA logo

IEA Greenhouse Gas R&D Programme

Technical Session 6

Time Session Paper
    Bubbling Fluidized Bed Combustion
14.00  6A Anthracite Oxyfuel Combustion in Fluidized Bed:
Isabel Guedea, Irene Bolea, Carlos Lupiañez, Luis I. Díez, Luis M. Romeo, CIRCE – Center of Research of Energy Resources and Consumptions; Pedro Otero, Jesús Ramos, 2CIUDEN– Fundación Ciudad de la Energia  
PRESENTATION
14.20  6A SO2 and NOx Emissions in a BFB Combustor (3kWth) Under Oxyfuel Combustion. Effect of Temperature and Flue Gas Recirculation:
Margarita de las Obras‐Loscertales, Aránzazu Rufas, Luis F. de Diego, Francisco García‐Labiano, Alberto Abad, Pilar Gayán, Juan Adánez, Instituto de Carboquímica (ICB‐CSIC)
PRESENTATION
14.40  6A Oxyfuel Combustion of Victorian Brown Coal in a 10 kWth Fluidized Bed Unit:
Bithi Roy, Sanar Bhattacharya, Monash University
PRESENTATION
13.00  6A Minimization of Air Ingress during the Retrofitting of Bubbling Fluidized Combustion to Oxyfuel Combustion:
Gabriel M. Faé Gomes, Leandro Dalla Zen, Fundação de Ciência e Tecnologia do Estado do Rio Grande do Sul (CIENTEC) and Universidade do Vale do Rio dos Sinos (UNISINOS); Guilherme P.S. Priebe, Jorge A. S. Cunha, Felipe H. Guarienti, Pedro Henrique E. de Lima, Fundação de Ciência e Tecnologia do Estado do Rio Grande do Sul (CIENTEC)
PRESENTATION
     
    Oxy‐NG Combustion Technology
14.00 6B Study of a Semi‐Closed OxyFuel Gas Turbine:
M. Ditaranto, Ø. Langørgen, I. Saanum, P.E. Røkke, SINTEF Energy Research; J. Janczewski, S.G. Sundkvist, Siemens Industrioal Turbomachinery AB
PRESENTATION
14.20 6B Evaluating Hjosir Temperature Oxy‐Natural Gas Retrofit of a Coal‐fired Boiler:
Bradley Adams, Timothy Shurtz, Reaction Engineering International; Andrew Fry, University of Utah
PRESENTATION
14.40  6B Combined Cycle Oxyfuel Process with CO2‐Capture Based on a Conventional Natural Gas Fired Turbine:
Tobias Treibs, Alexander Alekseev, Linde AG, Innovation Management/Clean Energy
PRESENTATION
15.00  6B Novel Oxy‐Combustion Gas Turbine Concepts for Off‐Shore Application:
Kristin Jordal, Rahul Anantharaman, Øyvind Langørgen, SINTEF Energy Research
PRESENTATION
     
    Novel Hybrid Technology in Oxyfuel Combustion
14.00 6C

Solid Fuel Combustin in Controlled Atmospheres - an Experimental Capability:
William Mahoney, Sabuj Halder, Robert Churpita, Praxair
PRESENTATION

14.20 6C A Staged, Pressurized Oxy‐Combustion System for Carbon Capture:
Benjamin Kumfer, Bhupesh Dhungel, Akshay Gopan, Fei Xia, Melissa Holtmeyer, Richard Axelbaum, Washington University in St. Louis, Dept. Energy, Environmental & Chemical Engineering; Jeffrey Phillips, David Thimsen,Electric Power Research Institute
PRESENTATION
14.40 6C Development of Hjosir Efficiency Oxyfuel IGCC System:
Yuso Oki, Satoshi Umemoto, Hiroaki Watanabe, Kazuhiro Kidoguchi, Yoshinobu Nakao,, Makoto Kobayashi, Saburo Hara, CRIEPI
PRESENTATION
15.00 6C COMPARAE Project: An Approach to Hybrid Oxy‐Post CO2 Capture Technology:
F. Vega, M. Rodríguez‐Galán, B. Alonso‐Fariñas, Benito Navarrete, Vicente Cortés, University of Seville
PRESENTATION
     
    Process Integration and Exergy Analysis 
14.00 6D Process Integration in Coal based Oxy‐Combustion Power Plants:
Chao Fu, Truls Gundersen, Norwegian University of Science and Technology
PRESENTATION
14.20 6D Exergy Analysis of Cryogenic Air Separation Unit Integrated within Oxyfuel Combustion Power Plant:
Marcin Liszka, Grzegorz Nowak, Jan Składzień, Silesian University of Technology
PRESENTATION
14.40 6D Energy Management and Efficiency Improvement for Oxyfuel Power Generation Systems with CO2 Capture: An Exergy‐Based Approach:
A. Shafeen, Chemical Engineering Department, University of Waterloo and CanmetENERGY, Natural Resources Canada; Kourosh Zanganeh, CanmetENERGY, Natural Resources Canada; Peter Douglas, Eric Croiset, Chemical Engineering Department, University of Waterloo
PRESENTATION
15.00 6D Integration of the Capture Unit with the Power Generation: Technology Advances in Oxy‐Combustion Plants:
Luca Mancuso, Noemi Ferrari, Foster Wheeler; Vince White, Air Products PLC; John Davison, IEA Greenhouse Gas R&D Programme
PRESENTATION