IEA Greenhouse Gas R&D Programme
Technical Session 5
Flue Gas Desulphurisation for hot Recycle Oxyfuel Combustion: Experiences from the 30MWth Oxyfuel Pilot Plant at Schwarze Pumpe: Uwe Burchhardt, Vattenfall R&D AB, SwedenPRESENTATION
CO2 Processing Experiences for Oxyfuel Combustion CO2 Capture - Based on Results from Vattenfall's 30 MWth Oxyfuel Pilot Plant: Uwe Burchhardt, Vattenfall R&D AB, SwedenPRESENTATION
Development of the CO2 Demonstration Plant from Experience of the CO2 Pilot Plant Schwarze Pumpe: Roland Ritter, Linde KCA Dresden GmbH, GermanyPRESENTATION
Commissioning and First Experiences of the Operation of "Alternative CO2 Pilot Plant" (ACPP at Schwarze Pumpe: Lars Stromberg, Vattenfall
The Vattenfall-Air Products Oxyfuel CO2 Compression and Purification Pilot Plant at Schwarze Pumpe - Initial Results: Vince White, Air Products PLC, UKPRESENTATION
Combustion Observation of Co-Firing with Bituminous and Sub-Bituminous Coals in Oxyfuel Condition: Gyungmin Choi, Pusan National University, South KoreaPRESENTATION
Modelling of Particle Radiation in Oxyfuel Flames: Klas Andersson, Chalmers University, SwedenPRESENTATION
Impacts of Oxyfuel Combustion on Coal Ash and Deposits: Jost Wendt, Utah University, USAPRESENTATION
Effect of Flue Gas Recycle Composition on Ash Coal Aerosol Chemistry in Oxy-Fired Combustion: William Morris, Utah University, USAPRESENTATION
Comparisson of RANS and LES Turbulance Models for Predicting Air-Coal and Oxy-Coal Combustion Behaviours: Alessandro Pranzitelli, Leeds University, UKPRESENTATION
Three Dimensional Modelling of a 300MWe Flexi-Burn CFB for Multifuel Combustion in Oxygen-Fired and Air-Fired Modes: Journi Ritvanen, Lappeenranta University, FinlandPRESENTATION
Assessment of of Full-Scale Boiler Oxy-Combustion Retrofit using CFD Modelling: Andrew Fry, Reaction Engineering, USAPRESENTATION
An Integrated CFD-Process Model for Oxy-Coal Combustion: Alessandro Pranzitelli, Leeds University, UKPRESENTATION
Prediction of Combustion andnHeat Recovery Characteristics of Oxy-Combustion Boiler using CFD: Makoto Takafuji, IHI Corp., JapanPRESENTATION