Technical Session 1
Time | Session | Paper |
Large Scale Oxyfuel Pilot Plant Experience | ||
14.00 | 1A |
Callide Oxyfuel Project – Overview of Commissioning Experience: |
14.20 | 1A | Callide Oxyfuel Project – Combustion and Environmental Performance: Chris Spero, CS Energy/Callide Oxyfuel Services Pty; Toshihiko Yamada, IHI Corporation; Peter Nelson, Tony Morrison, Macquarie University; Claire Bourhy‐Weber, Air Liquide Presentation |
14.40 | 1A | OxyCoal™ Burner Testing to Develop Models for Oxyfuel Combustion: David Sturgeon, JW Rogerson, Gerry Hesselmann, Doosan Power Systems Ltd. Presentation |
15.00 | 1A | Burner Tests in Vattenfall’s Oxyfuel Pilot Plant: Uwe Burchhardt, Rainer Giering, Vattenfall BU R&D Projects; Gerd Weiß, Vattenfall Europe Technology Research Presentation |
Fundamentals: Flue Gas Processing and Compression | ||
14.00 | 1B | Liquefaction of Oxyfuel Flue Gases – Experimental Results and Modeling of Heat Transfer Coefficients: Thorsten Küster, Rudolf Eggers,Hamburg University of Technology Presentation |
14.20 | 1B | Gas Phase Oxidation of SO2 by NO2 in Pressurized Flue Gas Systems ‐ An Experimental Investigation: Sima Ajdari, Fredrik Normann, Klas Andersson, Filip Johnsson, Chalmers University of Technology Presentation |
14.40 | 1B | Withdrawn |
15.00 | 1B | Flue Gas Processing: Strategies for Water Management. Water Removal and Moisture Control via Dew Point Modelling: Jens Hetland, SINTEF Energy Research Presentation |
Fundamentals: Heat Transfer and Combustion Diagnostics | ||
14.00 | 1C | Application of Optical Diagnostic Techniques to Oxy‐Coal Flames: Pal Toth, Terry Ring, Eric Eddings, University of Utah; Arpad Palotas, University of Miskolc Presentation |
14.20 | 1C | Gas Optical Properties of Oxy‐Fuel Combustion and Implications on Radiative Heat Transfer: Sebastian Rehfeldt, Hitachi Power Europe Presentation |
14.40 | 1C | Exergy-Based Methodology for the Minimization of the Energy Penalty of Oxy-pulverized Coal Power Plants with CCS: Hayato Hagia, EDF R&D, Fluid Dynamics Power Generation and Environment Department and MINES ParisTech, DEP - Department of Energy and Processes; Yann Le Moullec, EDF R&D, Fluid Dynamics Power Generation and Environment Department; Maroun Nemerb, Chakib Bouallou, MINES ParisTech, DEP - Department of Energy and Processes Presentation |
15.00 | 1C | Development and Application of a Novel Radiation Property Model for Oxy‐Coal Combustion: Alessandro Pranzitelli, Alastair Clements, Rachael Porter, Lin Ma, Mohamed Pourkashanian, University of Leeds;Augus Duncan, Doosan Power Systems Ltd Presentation |
Ash Deposition, Corrosion and Materials Selection | ||
14.00 | 1D | Air Pre‐heater Corrosion Behaviour Related to Halogens for Oxycoal Retrofit of Utility Boilers: Andrew Fry, University of Utah; Bradley Adams, Tim Shurtz, Kevin Davis,Reaction Engineering International; William Cox, Corrosion Management Ltd. PRESENTATION |
14.20 | 1D | Oxidation Behaviour of Possible Construction Materials for Heat Exchange Components in Oxyfuel Plants in the Temperature Range of 550‐650°C: P. Huczkowski, M. Schiek, Lorenz. Singheiser, W.J.Quadakkers, Forschungszentrum Jülich; A. Gerhardt, Vattenfall Research & Development AB; Uwe Burchhardt, Vattenfall Europe Generation AG Presentation |
14.40 | 1D | Influence of Ash Deposition in Oxyfuel Corrosion Experiments: Axel Kranzmann, Maria Mosquera Feijoo, Federal Institute for Material Science and Testing; Alba Baselga Zapater, Institut Quimic de Sarria Presentation |
15.00 | 1D | Behaviour of Deposit and Fly Ash under Oxyfuel Conditions: Manoj Paneru, Reinhold Spörl, Gosia Stein‐Brzozowska, Jörg Maier, Prof. Günter Scheffknecht, Institute of Combustion and Power Plant Technology (IFK), University of Stuttgart Presentation |