Explore our Publications Library

Discover the latest advances carbon capture and storage research

CO₂ Capture at Gas Fired Power Plants

1 July 2012
Capture

The study considers five scenarios, selected to examine the implications of capture technology type, configuration and plant operation, on the metrics outlined above. These scenarios are: 1. A CCGT power plant (Reference Plant); 2. Scenario 2 not used 3. A CCGT power plant with post-combustion capture; 4. A CCGT power plant with post-combustion capture and flue-gas recirculation; 5. A Combined cycle power plant with Natural Gas reforming and pre-combustion capture; and 6. A Natural Gas Reforming plant with pre-combustion capture, providing hydrogen to a remote combined cycle power plant or intermediate storage. 7. Scenario 7 not used

Technical Report

Barriers to Implementation of CCS: Capacity Constraints

1 July 2012
Capture

The study tried to be as comprehensive as possible but to limit the scale of the study some compromises had to be made. The study was based on global requirements and essentially used a high level approach and did not consider regional differences in skills, manufacturing bases etc., The study considered the full CCS chain, i.e. capture, compression, transport and storage of CO2 but excluded the power/industry equipment prior to the capture plant.

Technical Report

Operating Flexibility of Power Plants with CCS

1 June 2012
Capture

IEAGHG has commissioned Foster Wheeler Italiana to carry out a study to review the operating flexibility of the current leading power generation technologies with CCS and to assess performance and costs of some techniques for improving flexibility. This overview of the report was written by IEAGHG.

Technical Report

Gaseous Emissions from Amine Based Post Combustion CO₂ Capture Processes and their deep removal

1 May 2012
Capture

This report evaluates the emission from the PCC technology that uses amine based inhibitor-free solvents, particularly MEA, ammonia and amino acid salt based solvents. It identifies shortcomings in terms of the environmental performance of existing PCC technology. It also evaluates various emission control methods that may be applied to minimise the emissions particularly from MEA and other amine technologies. All these aspects of the study are covered in the four sections of this report. A complete evaluation of environmental impact of the amine based process would involve assessment of all direct discharge of waste material from the process and the fates of these compounds, including chemical transformations that occur after their discharge. However, it is to be noted that only gaseous emissions are evaluated in this report and liquid and solid emissions are considered as beyond the scope of this study.

Technical Report

Emissions of Substances Other than CO₂ from Power Plants with CCS

1 March 2012
Capture

The emissions of CO₂ from power plants equipped with carbon dioxide capture systems are reduced by upwards of 85% compared to equivalent plants without capture. However the full environmental impact of a plant fitted with CO₂ capture will depend also on what changes are induced in emissions of other substances in gaseous, liquid and solid form. Furthermore due to the increase in fuel and chemicals consumption typical for a CCS plant emissions due to the “upstream” and “downstream” processes and particularly those associated with increased fuel use, will also increase. Both these effects need to be taken into account if the technology is to be assessed on a life cycle basis. This study focuses only on the changes which are to be expected in the direct emissions, discharges and solid wastes of substances other than CO₂ from within the boundary of power plants fitted with CO₂ capture

Technical Report

Summary Report of the 6th Risk Assessment Network Workshop

1 March 2012
Event Proceedings
Storage

The three day workshop highlighted the latest international CO₂ storage risk assessment developments, discussing communication and regulatory developments, risk and incident management, potential induced seismicity, monitoring performance, understanding potential groundwater impacts, risk assessment methodologies, key outcomes and identified knowledge gaps which need to be addressed in future research.

Technical Review

Integration of Solar Energy Technologies with CCS

1 March 2012
Capture

This study was undertaken to identify and quantify opportunities for Carbon Capture and Storage (CCS) and renewable energy technologies to be combined in a synergistic way and to identify any options which would tend to leave a permanent legacy for the renewable power generation industry. Several interesting options were studied and the key option of providing renewable thermal energy to compensate for the parasitic losses incurred by post combustion CCS was studied in some detail.

Technical Report

3rd High Temperature Solid Looping Network Meeting

1 December 2011
Capture
Event Proceedings

The third meeting of the IEAGHG high temperature solid looping network was held from 29th August to 1st September at the Technical University of Vienna. It was held in parallel with a meeting of the IEA Fluidised Bed Combustion implementing agreement and the International Conference on Polygeneration. This gave the 108 delegates who attended the network meeting the opportunity to meet with those engaged in these other related areas. For this meeting a considerable effort was made to attract members of the Chemical Looping Combustion (CLC) research community which has been less represented at past meetings where calcium oxide looping (CaL) cycles for CO2 capture have tended to dominate. This should be a useful change as both processes use similar dual fluidised bed hardware and there is also emergence of hybrid schemes employing both types of reaction. Also several of the larger test facilities are now set up to test both CLC and CaL processes using the same equipment.

Technical Report

Addressing SO2/SO3/Hg/Corrosion Issues in Oxyfuel Combustion Boiler and Flue Gas Processing Units

1 December 2011
Capture

The workshop consisted of two full days, with 3 keynote addresses presented by Prof. Terry Wall (Newcastle University), John Pavlish (EERC) and Prof. Axel Kranzmann (BAM) which review the current understanding on the fate of sulphur and Hg, and corrosion issues during oxyfuel combustion. The keynote addresses were followed by 24 presentations covering the following topics: Fundamental research on the fate of sulphur – measurement techniques and discussion on sulphur balance Fundamental research on corrosion issues in high and low temperature regime during oxyfuel boiler operation. Fundamental research on corrosion and ash deposition during oxyfuel combustion Fundamental research on performance of the flue gas processing units in control of NOx, SOx and Hg. Large scale pilot testing experience

Technical Report

Summary Report of the 2nd IEAGHG Social Research Network Meeting

1 November 2011
Event Proceedings
Public Perception

The two day workshop discussed methodologies and techniques, working in contentious environments, social science CCS research in Japan, learnings from other energy technology research, use of social media, knowledge gaps which need to be addressed in future research and future aims of the IEAGHG Social Research Network (SRN).

Technical Report

The 7th IEAGHG Monitoring Network Meeting

1 November 2011
Event Proceedings
Storage

The theme for this year’s meeting centred on the 3 criteria for transfer of responsibility in the EU directive: Actual behaviour of the injected CO₂ conforms with the modelled behaviour; No detectable leakage; Storage site is evolving towards a situation of long-term stability While the directive is European, the aims are applicable and necessary to all worldwide storage projects. There is no information yet from experience for the 3rd point, which also derives from the first two, so the focus was on the first 2 aims.

Technical Report

Post Combustion Capture Conference 1

1 November 2011
Capture
Event Proceedings

PCCC1 aims to be a forum to discuss the various issues related to post-combustion capture technologies status and development. PCCC1 will provide an opportunity to encourage technology providers and developers to share their experiences and knowledge.

« Previous 1 … 16 17 18 19 20 … 28 Next »

Explore our resources

Discover everything that IEAGHG has to offer, from the latest publications to exciting events.

Publications

Discover our expansive library of leading CCS research covering a wealth of topics. From DACS to BECCS and Carbon Markets to Carbon Capture.

Discover More

Events

We are committed to sharing the latest CCS knowledge worldwide. Learn how you can join our global conferences, expert networks, workshops and webinars.

Experience More

News & Insights

Get the latest IEAGHG news, discover our impact, and uncover essential analyses of global CCS developments.

Stay Updated

Discover membership

Access to restricted publications is just the beginning. IEAGHG membership has unlocked CCS potential for government and industry around the world. Discover what it can do for you.

Discover More

Get the latest CCS news and insights

Get essential news and updates from the CCS sector and the IEAGHG by email.

Can't find what you are looking for?

Whatever you would like to know, our dedicated team of experts is here to help you. Just drop us an email and we will get back to you as soon as we can.